How to Build A Waterfall

Want to bring nature right into your home? I thing it would be swell for you to enter your garden and hear the ripples of water and the mesmerizing sound of water falling onto your pond. For one brief moment that would seem like you've suddenly been transported into a forest where you hear the bubbling and rippling sound of waterfalls cascading down from a ravine right into the river. Wouldn't that bring such a refreshing feeling to anyone who comes close to your pond? No matter how artificial your falls is, it would just the same bring you the feeling of getting close to nature. If you're interested to build a falls in your pond here are some helpful tips to do it.

Building a waterfall requires talent and skills to do it, and it entails patience and perseverance to get it done. You have to be creative and artistic as well so you will be able to bring out the aesthetic aspect of the waterfall that you intend to build.

You have to be serious and cannot afford to dilly dally on this task. Once you start the job, there will be dirt and a lot of mess all over the garden and your pond. You surely wouldn't want the unsightly situation to stay long in your garden. So you have to finish it up quickly.

When you are ready here are the steps to follow:

1. Determine the size of waterfall you want for the pond. The size of the pond in square feet should be 1 1/2times the square footage of the waterfall and stream. Do not aim for a big waterfall if you have a small area to place it. It will look absurd and out of place.
2. Determine the kind of waterfall that you want to build. You can install a simple one by putting a pond weir (a plastic box) on an elevated area of the pond. The water that's been collected from the pump will flow from the lip onto the pond. The rest that you have to do is hide the weir by placing rocks and plants around it to make the fall look natural.
3. You have to buy rocks and water plants to enhance the waterfall. You might want to build a natural waterfall which means that you will have to make use of a lot of rocks. Find a partly level ground in the pond on which you can securely place the rock formation you intend to do as your fall. Start placing the large and flat rocks on the first level then work your way up using your creativity in doing the rock formation. Secure the rocks in place for safety.
4. Run the water over to make sure that it does not flow over the edge but onto the pond. A minimum of 100 gallons of water flow for every inch of width of the fall is allowed. As volume increases, the sound of the waterfall increases. This is the basis on how to make its sound get louder or softer.